You're currently on:
My Shopping Basket
You have no items in your shopping basket.
- Category
-
- Deep Rounding Over (2)
- Double Rounding Over Spares (2)
- Flat Ovolo (1)
- Glazing Bar (5)
- Guided Flat Ovolo (2)
- Guided Round Over & Chamfer (5)
- Guided Window Board Cutter (1)
- Hand Rail (1)
- Large Step Ovolo & Rounding Over (6)
- Modern Skirting Mould Cutter (1)
- Octacut (3)
- Ovolo & Round Over (15)
- Pin Guided Ovolo Cutters (3)
- Pin Guided Round Over Cutters (6)
- Queen Anne Round Over (1)
- Round Over & Angle (1)
- Rounding Over Set (3)
- Rounding Over Set Arbor (1)
- Sash Bar (6)
- Shank Mounted Bearing Ovolo (5)
- Shoulder Scribe (8)
- Thumb Mould (1)
Compare Products
You have no items to compare.
Recently Viewed
-
Trend Bearing guided ovolo cutter 14.2mm radius
£59.93 Price includes VAT -
Trend Bearing guided multi-reed cutter
£58.26 Price includes VAT -
Trend Bearing guided flat sunk bead cutter
£25.84 Price includes VAT -
Trend Bearing 3/8" diameter 3/16" bore
£5.13 Price includes VAT -
Trend Bearing 26mm diameter 10mm bore
£13.18 Price includes VAT
Follow us on
Trend Bearing guided ovolo cutter 38.1mm radius
Self-guiding cutters for rounding over edges do not require a side fence.
Details
They are supplied with two bearings.
Use the larger bearing for a round-over.
If the cutter is lowered, a top quirk can be produced.
A full round/bullnose for stair treads can also be produced by taking a second pass from the opposite side of the workpiece.
Nett Weight: 395
Gross Weight (KG): 0.514
Barcode: 5027654009277
Specification: D=89 mm|C=50.8 mm|B=9.5 mm|B2=12.7 mm|R=38.1 mm|Shank Diameter=1/2 inch|
Catalog Page Numer: page_028.pdf
Use the larger bearing for a round-over.
If the cutter is lowered, a top quirk can be produced.
A full round/bullnose for stair treads can also be produced by taking a second pass from the opposite side of the workpiece.
Nett Weight: 395
Gross Weight (KG): 0.514
Barcode: 5027654009277
Specification: D=89 mm|C=50.8 mm|B=9.5 mm|B2=12.7 mm|R=38.1 mm|Shank Diameter=1/2 inch|
Catalog Page Numer: page_028.pdf
