 |
|
|
| | Record 2 Pack Roller Stand | | The RPR400 roller stand is invaluable in workshops when working with timber which is larger than the table area the machine provides. | | £39.95 | | 195 DIY POINTS (Worth £1.95 off your next order) | |
|
|
| | Record Roller Stands 1 Pair | | The roller stand provides safe and easy support for oversize workpieces. One pack of RPR400 contains two roller stands.
| | £35.95 | | 175 DIY POINTS (Worth £1.75 off your next order) | |
|
|
| | Sip Sliding Table For Circular Saws | | Two adjustable work supports - precision adjustment of work piece height. | | £91.95 - was £120.95, save £29.00 | | 455 DIY POINTS (Worth £4.55 off your next order) | |
|
|
| | Sip Stand For 10" Bandsaw (01484) | | Sip Stand For 10" Bandsaw (01484). Image shown for reference only. | | £40.95 - was £54.95, save £14.00 | | 200 DIY POINTS (Worth £2.00 off your next order) | |
|
|
| | Draper Vertical Drill Stand | | Drill Stand For use with hand-held electric drills with collar diameter of 43 or 38mm with supplied reducing bush. | | £45.99 | | 225 DIY POINTS (Worth £2.25 off your next order) | |
|
|
| | Draper 100mm 3 Way Drill Press Vice | | 3 Way 100mm Drill Press Vice Expert Quality, with three accurately ground mounting surfaces for drilling holes at 90°. | | £70.49 | | 350 DIY POINTS (Worth £3.50 off your next order) | |
|
|
|
|
| | SIP 01383 Adjustable V-Type Roller Ball Stand | | Designed with 2 rollers, each roller tilts and locks at any angle - from 0 to 45 degrees for both flat flanks and cylindrical workpieces. | | £36.95 | | 180 DIY POINTS (Worth £1.80 off your next order) | |
|
|
| | Sip Single Roller Stand | | Fully adustable - Heights from 700mm to 1100mm. | | £26.95 - was £27.45, save £0.50 | | 130 DIY POINTS (Worth £1.30 off your next order) | |
|
|
| | Draper 285mm Roller Stand | | For use with bandsaws and planer/thicknesser where additional support of lengthy workpieces is required. | | £24.49 - was £59.00, save £34.51 | | 120 DIY POINTS (Worth £1.20 off your next order) | |
|
|
| | Draper 400mm Roller Stand | | For use with bandsaws and planer/thicknesser where additional support of lengthy workpieces is required. | | £74.59 | | 370 DIY POINTS (Worth £3.70 off your next order) | |  (1) |
|
|
| |
|
|
|
| | Draper 500mm Tri-Roller Stand | | For use with bandsaws and planer/thicknesser where additional support of lengthy workpieces is required. | | £132.85 | | 660 DIY POINTS (Worth £6.60 off your next order) | |
|
|
| | Record Power RPR400 Roller Stands (Pair) | | The RPR400 roller stand is invaluable in workshops when working with timber which is larger than the table area the machine provides. The roller stand provides safe and easy support for these oversize pieces. | | £34.99 | | 170 DIY POINTS (Worth £1.70 off your next order) | |
|
|
|
|
|
|
|
|
|
